离子氮化与离子镀TiN复合涂层的结合强度及强化机理Bond Strength and Reinforcement Mechanism of Compound Coating of Ionitriding and Ion Plating TiN
胡树兵 ,崔崑
摘要(Abstract)：
研究了３Ｃｒ２Ｗ８Ｖ和Ｍ２基体进行离子氮化和离子镀ＴｉＮ复合涂层的结合强度和强化机理。利用ＸＲＤ法分析了涂层的相结构，用划痕法测定了涂层的结合力，并用ＳＥＭ观察分析了划痕形貌。结果表明，离子氮化与离子镀ＴｉＮ复合涂层的结合力和硬度均高于ＴｉＮ单层；合理的硬度梯度分布、膜基界面冶金结合、ＴｉＮ沉积过程中离子氮化ε－Ｆｅ２－３Ｎ相的含量减少、离子氮化过渡层对顶层ＴｉＮ涂层有力的支撑作用，是复合涂层强化的主要原因。
关键词(KeyWords)： 涂覆;离子镀;强化
基金项目(Foundation):
作者(Author): 胡树兵 ,崔崑
参考文献(References)：
- 1 Dinpomont N et al. Application of duplex coatings for metalinjection moulding. Surf.& Coat. Technol. 1995, 72
- 2 Bell T et al. Realising the potential of duplex surface engi-neering. Tribology Intemational, 1998, 31 (1-3)
- 3 He J L et al. Sliding wear resistance of tool steel coated withelectroless Ni - P and cathedic are plasma TiN. Surface andCoatings Technology, 1992, 53
- 4 Bader M et al. Properties of duplex treated (gas - nitridingand PVD - TiN, - CrN) low alloy steel. Surf. & Coat.Technol. 1998, 98
- 5 Skoric B et al. Induence of plasma nitriding on mechanicaland tribological properties of steel with subsequent PVDsurface trements. Thin Solid Films. 1998, 317
- 6 王亮等.离子碳氮共渗与离子镀TiN复合研究.金属热 处理学报,1999,20(3)
- 7 Bull S J et al. The use of scratch adhesion testing for thedetermination of interfacial adhesion: the importance offriction drag. Surf. & Coat. Technol. 1988, 36
- 8 Gredi T et al. Properties of TiN coatings deposited onto hotwork steel substrates plasma nitrided at low pressure. Surf.& Coat. Technol. 1992, 54 -55
- 9 Korhonen A S et al. Plasma nitriding and plating with in-tensified glow discharge. Thin Solid Films, 1983, 107
- 10 Zlatanovic M et al. Influence of plasma nitriding on wearperformance of TiN coating Surf. & Coat. Technol. 1994,64