过冷沸腾多相流模拟及发动机冷却结构研究Research on Subcooled Boiling Multiphase Flow Simulation and Engine Cooling Structure
张俊红;徐喆轩;王静超;徐天舒;林泽峰;马梁;
摘要(Abstract):
介绍了壁面沸腾换热模型、两相间换热系数模型、曳力升力等系数模型在内的多相流模型,建立多个发动机多相流过冷沸腾模型,比较各模型模拟结果差异,得到适用于发动机的多相流过冷沸腾模型,并建立不同结构的发动机冷却通道模型,通过多相流模拟分析发动机冷却通道的流动换热特点。研究结果表明:分离式冷却通道温度分布更均匀,但需增加出入口;连体式冷却通道需要注重上、下冷却通道的串联和出、入口位置的选择。
关键词(KeyWords): 发动机;过冷沸腾;多相流;相间模型;冷却结构
基金项目(Foundation): 国家重点研发计划项目(2017YFB0103504)
作者(Authors): 张俊红;徐喆轩;王静超;徐天舒;林泽峰;马梁;
DOI: 10.19620/j.cnki.1000-3703.20180455
参考文献(References):
- [1]傅松.缸盖冷却水套内沸腾传热特性的研究[D].济南:山东大学,2010.
- [2]ARASH M,HOSSEIN H.Two Phase Flow Simulation for Nucleate Boiling Heat Transfer Calculation in Water Jacket of Diesel Engine[C]//ASME-JSME-KSME Joint Fluids Engineering Conference,July 24-29,2011,Hamamatsu Japan,2011.
- [3]谷芳,吴华杰,崔国起.基于VOF两相流的缸盖过冷沸腾模型及试验验证[J].内燃机学报,2014,32(4):372-376.
- [4]HUA S Y,HUANG R H,ZHOU P.Numerical Investigation of Two-Phase Flow Characteristics of Subcooled Boiling in IC Engine Cooling Passages Using a New 3D Two-Fluid Model[J].Applied Thermal Engineering,2015(90):648-663.
- [5]张俊红,赵永欢,徐喆轩,等.发动机水套中沸腾传热的试验与仿真研究[J].内燃机工程,2018,39(1):42-48.
- [6]MORAGA F J,BONETTO F J,LAHEY R T.Lateral Forces on Spheres in Turbulent Uniform Shear Flow[J].International Journal of Multiphase Flow,1999,25(6-7)1321-1372.
- [7]ANTAL S P,LAHEY R T,FLAHERTY J E.Analysis of Phase Distribution in Fully Developed Laminar Bubbly TwoPhase Flow[J].International Journal of Multiphase Flow,1991,17(5):635-652.
- [8]SCHILLER L,NAUMANN Z Z.A Drag Coefficient Correlation[J].Zeitschrift des Vereins Deutscher Ingenieure,1935,77(1):318-320.
- [9]CLIFT R,GRACE J R,WEBER M E.Bubbles,Drops,and Particles[M].Cambridge:Academic Press,1978.
- [10]TOMIYAMA A.Struggle with Computational Bubble Dynamics[J].Multiphase Science and Technology,1998,10(4):369-405.
- [11]ISHII M.Two-Fluid Model for Two-Phase Flow[J].Multiphase Science&Technology,1990,5(1-4):1-63.
- [12]RANZ W E,MARSHALL W R.Evaporation from Drops[J].Chemical Engineering Progress,1952,48(3):141-146.
- [13]HUGHMARK G A.Mass and Heat Transfer from Rigid Spheres[J].Aiche Journal,2010,13(6):1219-1221.
- [14]DEL VALLE V H,KENNING D B R.Subcooled Flow Boiling at High Heat Flux[J].International Journal of Heat and Mass Transfer,1985,28(10):1907-1920.
- [15]COLE R.Bubble Frequencies and Departure Volumes at Subatmospheric Pressures[J].AIChE Journal,1967,13(4)779-783.
- [16]TOLUBINSKY V I,KOSTANCHUK D M.Vapour Bubbles Growth Rate and Heat Transfer Intensity at Subcooled Water Boiling[C]//International Heat Transfer Conference4.Turkey:Begel House Inc.,1970:23.
- [17]KOCAMUSTAFAOGULLARI G,ISHII M.Interfacial Area and Nucleation Site Density in Boiling Systems[J].International Journal of Heat and Mass Transfer,1983,26(9):1377-1387.
- [18]COLE R.A Photographic Study of Pool Boiling in the Region of the Critical Heat Flux[J].AIChE Journal,1960,6(4):533-538.
- [19]LEMMERT M,CHAWLA J M.Influence of Flow Velocity on Surface Boiling Heat Transfer Coefficient[J].Heat Transfer in Boiling,1977,237:247.
- [20]WEN H L.A Pressure Iteration Scheme for Two-Phase Flow Modeling[C]//Computational Methods for Two-Phase Flow and Particle Transport,1980:61-82.